|
Label-Aire Inline 6000 Front/Back & Neck Labeling
System
|
A contract packager needed a labeling system to apply clear
labels to the front and back of a variety of container shapes
at speeds up to 160 containers per minute. Also required was
the ability to apply a label to the neck of these containers.
The custom solution was to modify its Inline Series
6000 open-frame labeling system to accommodate a total of three
3115 Wipe-On applicators. One applicator was mounted near the
infeed side of the system for neck labeling. The remaining two
applicators were placed on opposite sides of the 14 foot long
conveyor for front/back labeling.
A chain aligner was also mounted near the infeed
side to align the oval-shaped containers prior to reaching the
top trap hold down unit. Custom layered wipe-down squeegees
were designed to provide superior clear label placement.
|
|
|
| |
Label-Aire Inline 6000 Wrap (Oblong & Round)
|
A producer of natural personal care products needed a single
labeling system that could wrap apply decorative labels to both
their oblong-shaped deodorant stick containers and to their
round lotion bottles.
The solution was to configure the Inline Series 6000 labeling
system with the 3115 Wipe-On applicator and a selection of available
options to make the quick change from round to oblong containers
(and vice-versa) possible. The result was the Inline 6000 Wrap
Labeling System. For round containers, the 6000’ss wrap
belt spins the moving bottles several times against a padded
pressure plate after the point of application, ensuring accurate
and wrinkle-free labels every time. |
|
|
| |
Label-Aire Rotating Electronic Article Surveillance
Labeler
|
A compact disc manufacturer required one applicator to apply
both Checkpoint and Sensormatic tags, from six different rotating
positions, on CD jewel cases at speeds up to 60 products per
minute.
Label-Aire designed an applicator with two custom, adjustable,
extended snorkels; each extended snorkel was outfitted with
a dedicated custom tamp assembly for either Checkpoint or Sensormatic
tags. The custom tamp is able to rotate the tag 45 degrees,
90 degrees, or 135 degrees in either a clockwise or counter
clockwise direction. The adjustable snorkels can be extended
to any of three fixed lengths across the conveyor.
|
|
|
| |
Kirk-Rudy KR215 Indexing Shuttle Forms Feed System
|
Consisting of the KR 215 feed base, KR 211 label head and shingle
conveyor, the KR 215 Labeling System combines the flexibility
of the KR feed base with the precise label registration of the
KR 211 label head. Media size ranges from single sheets 3.5"
wide by 5" long to books 5/8" thick books 17"
wide by 14" long.
Attaches paper address labels onto a wide variety of paper
products.
|
| |
|
Walco 655 MB High Speed Friction Feeder with Stand
& Conveyor
|
655 MultiBase has a transport base that is
designed for a vacuum transport for label applicators. It’s
user-friendly controls makes it easy to use. Options include
conveyor speed for address sorting & synchronized speed
following with the Straight Shooter Friction Feeder.
Features:
The 960 VSC is a 8’ variable speed conveying unit. It
is easy to operate with controls & software output customization.
A variety of applicators can be used in conjunction with the
Walco equipment for labeling applications. Example are (but
not limited to): cards, sheets, forms, and brochures/pamphlets.
|
|
